| |
|
| |
The CC320 Trigger timing controller
- Integrates encoders, cameras, lighting, proximity sensors, reject gates and more!
- Fast and simple set up – no complicated programming routines
- Ethernet enabled for remote interfacing
- Fast and accurate timing functions
- Small compact size
- A true single component solution for machine vision integration applications
|
 |
| |
Are you looking to integrate cameras, lights, proximity sensors, encoders, reject gates into a fully functional solution? If you are, the CC320 offers you a simple to use cost effective solution. The timing from one event to the next can be quickly and easily programmed to microsecond accuracy.
With 8 independent input channels, the controller can take a range of input signals from various components and use these to trigger events on any of the 8 independent output channels.
Each of the 8 output channels can be individually programmed offering complete control over the pulse delay and pulse width, as well as a trigger delay enabling filtering of noisy trigger signals. In applications where encoders are connected to the input channels, outputs can be configured as functions of encoder pulses rather than absolute time values, creating a very versatile solution.
Ethernet enabled as standard, the CC320 can be quickly configured using our free software which can be downloaded from this page, or even simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the |
| |
| parameters. Using a third party software package? Not a problem. The CC320 has a simple command set that is detailed in the manual allowing easy communication. As will all Gardasoft products, all the settings are stored in non volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. The different ways the CC320 can be configured is endless. To give you an idea of how the CC320 can be utilised, please take a look at application note 937 which can be downloaded from the link on left. This application note highlights just some of the ways in which the CC320 has been utilised within machine vision applications. |
Software interface
Web browser interface
Click on the thumbnails to preview the screen images
|
|
| |
The full product specification is detailed on the product datasheets. Please click on the left hand buttons to access the datasheets, manual, software and application notes.
|
| |
|
|
