Please enter your details to download the

First Name*:  
Last Name*:  
Company Name*:  
Email address*: 

Ask the expert
Please use the form below to send us any question you may have for our application experts.

First Name*:  
Last Name*:  
Email address*: 
Country *:  
Your Question: (maximum 2500 chars) 

World leaders in
LED Lighting and Control


VCT6 High intensity OEM LED Strobe Lights
  • VCT6 High intensity OEM LED Strobe Lights
  • VCT6 High intensity OEM LED Strobe Lights
  • VCT6 High intensity OEM LED Strobe Lights

VCT6 High intensity OEM LED Strobe Lights

Key features:

  • Specifically designed for OEM mobile applications
  • 0.5kW Pulse Drive to the LED gate array
  • 12-24VDC power supply
  • Compact IP65 enclosure

For a full specification please refer to the VCT6 datasheet

Typical applications:

ANPR /LPRRed Light ViolationSpeed enforcement
Toll management systemsRail container scanningWeigh in motion

The Gardasoft VCT6 lights provide a very powerful LED strobe illumination for OEMs creating ITS solutions, and can be ordered as complete with IP65 housing (VCT6) or board-only version (VCT6-T20).

Using the highest high power LED technology available, the VCT6 system supplies up to 500W pulses to the LED array. It is fully integrated with internal timing, intensity control, trigger input and long distance communications.

The illuminators are available in Board format or compact IP65 rated housings allowing for flexibility of OEM development design and installation in very harsh environments if required. All VCT6 products are RoHS compliant.

VCT6 lights are available in a range of wavelengths and beam angles to match applications with their unique imaging requirements. IR wavelengths for non-invasive applications: White light plus other visible wavelengths are available when specific or additional vehicle/driver details are required.

VCT6-T20 Board-only version

VCT6-T20 Board-only version

A trigger input signal is available to synchronise the lighting pulse with camera exposure, and the VCT6 can optionally be operated in a free-running mode from a programmable internal timer.

Photometric Data
ModelDescriptionPeak measurement at 3.0m
VCT6-850-14Illuminator, IR LED, 14° beam angle214W/m2
VCT6-850-28Illuminator, IR LED, 28° beam angle41W/m2
VCT6-W-12Illuminator, White LED, 12° beam angle32kLux
VCT6-W-28Illuminator, White LED, 28° beam angle6kLux

ParameterVCT6 Series Specification
Wavelength850nm, 940nm, White (others available on request)
Pulse Width Timing ControlInternal timing or external control
Maximum pulse width2ms
Maximum trigger frequency10kHz
Maximum Duty Cycle at 100% Intensity3%
Lighting Drive Power (Pulsed)500W
Brightness Repeatability±1%
Power supply requirement12-24VDC @ 2.5A Average
Dimensions (excluding cable)230(W) x 117(H) x 60.5(D) mm
Trigger Input5 ~ 24 VDC optocoupler
Trigger outputOpto-transistor switching 24V at up to 50mA
Operating Temperature-20°C ~ +55°C
Storage Temperature-20°C ~ +70°C
Operating Relative Humidity0% ~ 90% (not condensing)
Front glassPolycarbonate, dark red (850nm) or clear (White)
Case finishingAnodized aluminum